eosl.ai ›
home › Juniper › QFX3000 › QFX3000-JSL-EDGE-FAB
Switch · QFX3000

QFX3000-JSL-EDGE-FAB

QFX Series QFX3000 — QFX3000 switch

EOSL — PAST
30 mo
past end of service life

Lifecycle position

now
availableend of saleservice
Available—
End of saleAug 2019
End of serviceDec 2023Juniper bulletin ↗
Last security firmware—

Options from here

Third-party maintenance

Covered past the OEM cutoff by an independent maintainer.

Pre-stock spares

Modules and units still circulate on the secondary market.

Schedule migration

Carrying production traffic? Set the replacement window now, not mid-outage.

Run to failure

Low-criticality role — document the risk, harden backups, retire on your terms.

Other SKUs in QFX3000

QFX3000M-JSL-DRCTR-FABQFX3000 switch›

QFX3000-JSL-EDGE-FAB — questions

Is the Juniper QFX3000-JSL-EDGE-FAB still supported?

No. Juniper's last date of support for QFX3000-JSL-EDGE-FAB was Dec 2023 (per the Juniper end-of-sale bulletin) — it is past end of service life.

When did the QFX3000-JSL-EDGE-FAB reach end of sale?

QFX3000-JSL-EDGE-FAB reached end of sale Aug 2019, per the Juniper end-of-sale bulletin.

What is the last date of support (EOSL) for the QFX3000-JSL-EDGE-FAB?

Dec 2023 — per the Juniper end-of-sale bulletin.

Can the QFX3000-JSL-EDGE-FAB be maintained after Juniper support ends?

After the last date of support, QFX3000-JSL-EDGE-FAB units can often be kept in production through third-party maintenance providers. Juniper no longer issues software fixes, support, or hardware replacement for it.